INTERNATIONAL
m punkt nu
ESP8266 SMD Adapter Board R2
Art.nr: ESP8266SMD
Ej i lager
Leveranstid:
-
Note: Does NOT include a ESP8266 board!
Simple ESP8266 ESP-12 SMD to DIP/PTH adapter board. R2 version support not only ESP-07, ESP-12 but also new ESP-12F, which has extra 6 pis (SPI and I/Os).
Has two buttons, for flash and reset....
Simple ESP8266 ESP-12 SMD to DIP/PTH adapter board. R2 version support not only ESP-07, ESP-12 but also new ESP-12F, which has extra 6 pis (SPI and I/Os).
Has two buttons, for flash and reset....
- Produktbeskrivning
- Specifikationer
Produktbeskrivning
Note: Does NOT include a ESP8266 board!
Simple ESP8266 ESP-12 SMD to DIP/PTH adapter board. R2 version support not only ESP-07, ESP-12 but also new ESP-12F, which has extra 6 pis (SPI and I/Os).
Has two buttons, for flash and reset. For further information see specifications below!
Simple ESP8266 ESP-12 SMD to DIP/PTH adapter board. R2 version support not only ESP-07, ESP-12 but also new ESP-12F, which has extra 6 pis (SPI and I/Os).
Has two buttons, for flash and reset. For further information see specifications below!
Specifikationer
- On board LDO for 3V3 power, 0.5-1A output (NOT for serial port and other IO pins), input voltage range 5-12V
- 1K resistor between CHPD and VCC, to enable chip
- 1K resistor between GPIO2 and GND
- GPIO15 to GND for normal flash boot mode
- On board Reset button and flashing firmware button (GPIO0). Press down the flashing firmware then press the reset will enter into firmware fleshing mode
- Breadboard friendly.
- Board size 25.4 x 33 mm